The Valve Mounted Cylinder (Variant Type) offered by us incorporates a double acting cylinder with valve mounted directly on it. This avoids excessive piping as just an inlet is required to be given to the inlet of the valve. Outlet ports of the valve are pre-connected to the ports of the cylinders. This cylinder is not continuously reciprocating type. On / off switches are required to enable the forward and return stroke.

" For More Details See The Attached PDF "

We offer our clients a precision engineered range of Pneumatic Cylinder and Mountings in different sizes (from 25mm-350 mm Bore Diameter). We are renowned to manufacture long strokes upto 3 metres with mirror finish accuracy on the id of our tubes. Our range of cylinder offers long lasting, trouble-free life that is very easy to maintain. Details and specifications are downloadable below the image.

 

" For More Details See The Attached PDF "

ISO 6431 "Pace Series" Pneumatic Cylinders are designed as per the international standards to ISO 6431. These are essentially very light weight and use Aluminum pressure die cast end covers which impart high impact resistance and aesthetic appeal. The cylinders are available from 32 mm-100 mm Diameter. All Mountings are available which are inline with the ISO 6431 standards.

 

" For More Details See The Attached PDF "

We are one of the trusted manufacturers of a wide range of Classic Series F.R.L. These are manufactured using high grade material and have minimum ambient temperature of 60 deg. C and minimum ambient temperature of -10 deg. C. The maximum condensate capacity and standard nominal flow rate 1-2 depends upon the size of the product.

" For More Details See The Attached PDF "

Series - T Midget Cylinders offered by us can be availed in bore sizes of 8mm/12mm, 20mm &25mm. our clients can also avail higher bore sizes of upto 40mm. These cylinders have improved aesthetic quality as compared to Tie rod mounted cylinder. The front cover is threaded to the tube where seals can be easily replaced. Cylinder can be directly neck mounted as the front / rear covers are threaded reducing system installation time.

 

The technical specifications of our range are mentioned below:

• Working Pressure: 1 to 10 bar
• Ambient Temperature: 20 to 80 Centigrade
  
• Fluid: filtered air / water
• Barrel: Brass
• End Caps: Aluminum
• Piston: Aluminum
• Piston Rods: En8 Hard chrome plated
• Seals: Nitrile

" For More Details See The Attached PDF "

Our range of Air Amplifier takes energy from a small volume of compressed air to produce a high velocity, high volume, low pressure output air flow. These are quiet, efficient and can amplify flows up to 20 times their input air consumption rate. The compressed air flows from the supply inlet into an annular chamber, and then throttled by an annular gap resulting in high velocity air which directs the flow outward. The low pressure area at draws in a high volume of surrounding air producing high volume, high velocity output flow.

 

The advantage of Air Amplifiers over fans:

• More compact, simple, lightweight and portable
• Driven by air, not electricity for safety
• No moving parts - hence more safe and maintenance free
• Each end can be ducted for light conveying applications

 

Typical Applications

Automotive: replace fans, used for blow-off, cleaning, drying, cooling and conveying Remove water, coolant, dust, and scrap in parts manufacturing and in assembly operations Cool enamel and water based paints in parts manufacturing, auto body shops or assembly lines	Metals: Coolant and other liquid removal on process lines from Aluminum, Steel, Brass or other materials Dry metals prior to other operations such as plating or polishing Cool metal parts prior to coating or painting. Coolant mist removal Boost vacuum systems to remove grinding dust. Cool steel forgings
Bottling: Blow off of water from the tops of cans or some bottles prior to labeling, ink jetting, palletizing or packaging Conveying light material	Plastic: Dust and scrap blow off Cool moldings after extrusion, then blow off and dry prior to forming

We offer Hydraulic Cylinders to our clients that find application in fluid power when force requirement is on the higher side. These are known for sturdy construction and are preferred when jerk free motions are required. Our range of cylinders can be availed in different shapes & sizes as per the client’s requirements.

 

Salient Features

• Square construction assembled and bolting using Tie rods
• Simple construction enables easy change of seals
• Available in Bore sizes of 40 mm to 200 mm and pressure up to 220 Bar
• Mounting accessories can be provided on such as Flange, Pivot, Foot brackets, Trunion
• Cushioning possible on both ends
• Double Acting - Forward and return motion by oil
• Single Acting - Forward stroke by oil & return by load exerted on the piston rod

 

Material of Construction

Tube - Carbon Steel duly hard chrome plated

Seals - Fabric reinforced, Covers - Steel Piston - Steel. Piston

Rod - En8 hard chrome plated, Guide Bush - Gun Metal

Maximum operating pressure - 200

Bar Temperature Range - 850c

 

" For More Details See The Attached PDF "

We manufacture a wide range of Spool Valve from 1/8" BSP -1 1/2" BSP. They are made in all types suitable for pneumatic applications. The position of the spool is governed by external means of actuation which could be manual of electrical.

 

" For More Details See The Attached PDF "

Our organization is engaged in manufacturing of Poppet Type valve that finds application in adverse environments where there are considerable pollutants in the air like cement plants. The property of working without lubrication enables no clogging of valves passage and wear of seals. The response time of the poppet valve is ten percent less than the conventional spool valve thereby leading to more number of strokes per minute.

 

Selection of Poppet valve is based on the following criteria:

• Forward operating mechanism of poppet
• Return operating mechanism of poppet ( spring return)
• Number of ports
• Number of positions (available in two position)
• Port size (available in 1/4" / 3/8" / 1/2" / 3/4" B.S.P.)

" For More Details See The Attached PDF "

Our range of Direct Acting Valves is so called because the change in direction of the air passage is facilitated direct movement of the plunger inside the sleeve assembly of the coil. No lubrication is required in these valves and the major advantage of using these valves is that they can be operated at a very low pressure of up to 0.2 bar. This gives our valves preference over other models for low pressure operation. The orifice size ranges from 1.5mm to 6 mm and makes these ideal for applications requiring a low flow rate.


" For More Details See The Attached PDF "

We are recognized amongst the trusted manufacturers of Miscellaneous Control Valve like flow control valves. quick exhaust valves, non return valves. These are designed as per the industrial standards and are manufactured utilizing high grade material. our range caters to the requirements of various industries and are known for robust design, high performance and low maintenance.

 

" For More Details See The Attached PDF "

Available with us is a wide range of Pneumatic Actuators that is powerful and compact double rack & pinion unit. These are used with ball, butterfly & plug valves and any device requiring accurate and dependable % turn rotary motion. These have high grade steel and aluminum components that provide valves a tough and reliable unit for the automation industry. Spring return actuators incorporate the multiple spring concepts for maximum flexibility and they are also "field serviceable". Our range of Actuators covers the small and large end of the Torque range 5 sizes from 0.47KGM to 43.09 KGM. These incorporate a body of aluminum hard anodized and have piston where the rack teeth are precision machined onto the aluminum casting.

 

Material of Construction

• Body: Aluminum hard anodized
• Piston: Aluminum
• Pinion: En1
• Spring: Spring steel material, Grade no.3 End Caps Aluminum pressure die cast & anodized
• Guide: Nylon
• 'O' Rings: Nitrile
• Fasteners: Stainless steel, Ss304
• Indicator: Nylon

" For More Details See The Attached PDF "

Our range of Y- Type Control Valves is a cost effective solution to control fluid media which cannot be controlled by diaphragm valves or poppet valves. These valves can handle fluids at high temperature up-to 180° C and does not react to most corrosive fluids. The 2/2 Way Pneumatic On - Off "Y" Type Control Valve is manufactured using S 316(ASTM-A351 CF8M) S.S. 304 (ASTM-A-351 Gr.CF8) and C.S. (ASTM-A-216 GR.WCB) with a range of 14" (15mm) to 2" (50mm).

 

" For More Details See The Attached PDF "

We are reckoned amongst the trusted vendors of Solenoid Valve with Flame Proof Enclosure. Our valves are available with flameproof enclosure, which is duly tested, approved and certified by CMRS Dhanbad. The enclosure is designed with a safety feature which does not ignite in any explosive atmosphere. Our Solenoid Enclosure are made using die cast Al alloy, epoxy coated & cable entry 3/4" B.S.Con & cableglands and brass / S.S. these are ideal for accepting 1.5 sq mm / 2.5 sq mm cable. We also offer continuous duty moulded class 'H' Solenoid Coil that are provided with external earthing terminals. Our coils are in compliance with the IS8935 from Govt. of India, WRTC.

 

The applications areas of our range are listed below:

• Chemical plants
• Fertilizer plants
• Offshore oil / gas exploration rigs / vessels
• Pharma / research labs
• Petrochemicals / Refineries
• Synthetic fuel gasifier
• All industries demanding intrinsically safe circuits